When the AC stops cooling or the furnace quits, the call is simple. You describe what the system is doing, we scope the job on the phone, and the price is confirmed before anyone is scheduled to come out. That is how it works from the first call to the end of the visit.
We handle heating and cooling for homes and rental properties across Fair Oaks Ranch and the surrounding area.
Whether the system has been running rough for a season or stopped working altogether, call (830) 632-8965 to get started.
What a job costs depends on what the job actually is. A diagnostic visit, a refrigerant recharge, a blower motor swap, and a full system replacement are four different scopes with four different price ranges. When you call, we work through what the system is doing and what equipment is involved, and the rate is confirmed before anything is put on the schedule.
Three things tend to move a quote: what the fault turns out to be once the system is opened up, what has to be reached to get to it, and whether a repair makes sense or whether replacement is the better answer given the age and condition of the equipment. We give you a straight answer on all three before the visit is booked.
Ask what the visit covers and you get a plain answer. The diagnosis explained on every call means you know what you are agreeing to before work begins.
A system that is down completely is a different situation from one that is running but not keeping up. When there is no cooling on a hot afternoon or no heat on a cold night, we take those calls as priority work. We are available every day from 6:00 AM to 9:30 PM, including weekends.
For rental properties in Fair Oaks Ranch, a system that goes down affects a tenant, and that changes the timeline. We take short-notice calls and work around occupied properties. The appointment is confirmed on the phone, and the scope is set before anyone arrives so the visit does not run longer than it needs to.
Short cycling, strange noises and weak airflow each point somewhere different. When you call, we ask the right questions to narrow it down before the technician arrives, which means the visit starts at the likely cause rather than at the beginning of a long list.
When a home gains a new room or a converted space, the existing duct system was not designed to reach it. Running new ductwork to an addition is not just a matter of extending a branch line. The existing system has to be able to handle the added load, and the new branch has to be sized so that airflow reaches the space rather than dumping into the nearest return. We scope that on the call and confirm what the visit involves before anything is scheduled.
A dirty evaporator coil is one of the more common reasons an air conditioner runs continuously without cooling the house down. The coil sits inside the air handler and transfers heat out of the air passing over it. When it is coated in dust or debris, that transfer slows, the system works harder, and the space stays warm. Cleaning restores efficiency. If the coil itself is damaged or leaking refrigerant, repair or replacement is the next step, and we confirm which one applies before quoting the work.
A tune-up before the cooling season means the system goes into summer with confirmed refrigerant charge, clean coils, and a blower that has been checked. Before the heating season, it means the furnace or heat pump has been inspected before the first cold front. Catching a capacitor reading low or a filter that has been in place too long during a maintenance visit costs less than catching it during a breakdown call.
When the system does not respond at all, the diagnostic covers the thermostat, the control board, the blower circuit, and the disconnect before anything is assumed. An AC that will not start is not automatically a compressor problem, and quoting a compressor before the diagnostic is done is not how we work. The call before the visit helps narrow the likely cause, and the technician confirms it on arrival.
A failing compressor draws high amperage, trips breakers, or runs without producing cold air. A condenser coil that is blocked or damaged restricts heat rejection and forces the compressor to work harder. Both are serious faults, and both affect whether repair or replacement is the more sensible path. The age of the equipment changes that answer, and we say so plainly rather than defaulting to the most expensive option.
A ductless mini-split handles heating and cooling for a space that the central system cannot reach. That is the situation it was built for: a room addition, a converted garage, a detached structure, or a space where running new ductwork is not practical or not cost-effective.
Mini-splits also make sense for zoning in homes where different parts of the house need different temperature control. A single outdoor unit can serve multiple indoor heads, each with its own thermostat. Airflow balanced rather than left to chance means each zone gets what it needs rather than competing with the rest of the house.
We handle both installation and repair on ductless systems. If a mini-split is losing efficiency, not switching modes, or not responding to the control, that is a diagnostic call the same as any other.
An older thermostat holds one temperature setting and responds slowly. A modern programmable or smart control can hold different settings by time of day, by day of the week, or by occupancy, which means the system is not cooling or heating an empty house to full comfort. In a home that is unoccupied during the day, that difference shows up on the utility bill.
A thermostat swap is also worth doing on its own when the existing control is misreading the room temperature, short cycling the system, or simply not communicating reliably with the air handler. We install and configure thermostats and smart controls as a standalone job, and the setup is confirmed working before the visit ends. For the full list, go to our HVAC services page.
Homes in Fair Oaks Ranch vary in age and in how well the HVAC equipment has been maintained. A system that has not had a tune-up in several years, or one that was installed when the house was built and has never been replaced, is not necessarily at the end of its life. But it needs a proper look before that question can be answered honestly.
Access to the air handler, a clear path to the outdoor unit, and a filter that has been changed recently all make a diagnostic visit faster. A system that has service records, even informal ones, gives the technician a starting point. Neither of those is a requirement, but they help.
Equipment that is no longer manufactured, ductwork that was modified without documentation, or a system that has had multiple repairs by different people can make diagnosis slower. We work through it the same way regardless. The scope is confirmed on the call, and if the visit turns up something beyond what was discussed, that gets explained before any additional work is quoted.
We cover Fair Oaks Ranch and the communities around it, including Scenic Oaks, Boerne, Cross Mountain, Grey Forest, and Timberwood Park. Bexar County properties across this part of the area are within our service range.
If you are not sure whether your address is covered, a quick call will confirm it. We do not ask you to figure that out before you reach us.
We are available every day from 6:00 AM to 9:30 PM. For commercial replacements where business hours are a factor, call us and we will talk through what scheduling options are available within those hours.
Yes. We cover Fair Oaks Ranch and the surrounding area, including properties that sit outside the denser residential sections of town. If your address is in Bexar County near Fair Oaks Ranch, call us and we will confirm coverage on the phone before anything is scheduled.
Yes. A system that sits idle for months can develop issues that are not visible until it is started up again, including coil contamination, pest intrusion into the unit, and refrigerant changes that only show under load. A pre-season check before the property is occupied again is a practical step.
Call us and describe what was done and what the system is doing now. A repair that does not hold usually means the underlying fault was not fully identified the first time. We run the diagnostic from the beginning rather than assuming the previous diagnosis was correct, and we confirm what we find before quoting any additional work.
Whether the equipment is new, old, running rough, or not running at all, the call starts the same way. You describe what is happening, we scope it on the phone, and the price is confirmed before the visit is scheduled.
Call New Braunfels HVAC Company at (830) 632-8965. We are available every day from 6:00 AM to 9:30 PM.
Just as close, we take heating and cooling work in: Scenic Oaks, Boerne, Timberwood Park. View our complete coverage area.
From a quick AC repair to a full system replacement, we handle the heating and cooling work that keeps Fair Oaks Ranch homes and commercial buildings running through long Texas summers and the cold fronts that follow. The services below cover the full range of what we do, along with what each visit includes, who it fits best, and a practical note on timing or value. Call us with any questions and we will walk through the options before anything is scheduled.
| HVAC Service | What It Covers | When You Need It | What to Keep in Mind |
|---|---|---|---|
| Heat Pump Repair & Service | Reversing valve operation checkRefrigerant charge and leak inspectionDefrost cycle testingThermostat and control board diagnostics | Homes with a heat pump that is not switching between heating and cooling modes or is losing efficiency | A heat pump that struggles in heating mode but cools fine often has a reversing valve issue rather than a refrigerant problem. The diagnostic identifies that distinction before anything else is checked. |
| Full System Installation & ReplacementMost Popular | Load calculation and proper sizingMatched condenser, air handler, and coilRefrigerant line and electrical connectionsSystem testing and airflow verification | Homeowners whose system is aging, requiring repeated repairs, or no longer keeping up with the cooling load | Replacing components from the same equipment generation keeps efficiency ratings accurate and avoids compatibility problems that come from mixing old and new hardware. |
| Emergency HVAC Service | No-heat and no-cool responseSystem-down diagnosisRepair or temporary stabilizationPrice confirmed before the visit | Any situation where the home is not cooling in July or the heat is out on a cold night and it cannot wait for a routine appointment | We take emergency calls every day from 6:00 AM to 9:30 PM. Having the make and model of the equipment ready speeds up the phone diagnosis before the visit is scheduled. |
Call us at (830) 632-8965 and we will go through the details, confirm the price, and get the right service scheduled for your home or building.
(830) 632-8965