New Braunfels HVAC Company handles heating and cooling for homes, rental properties, and businesses across New Braunfels and Comal County. AC repair, furnace service, heat pump installation, full system replacement: whatever the job, the diagnosis explained on every call before anything gets scheduled. Nothing gets replaced before you know why.
Call for a quote: (830) 632-8965
For residential and commercial HVAC work alike, the range of jobs we handle covers everything a property needs to stay comfortable through a Central Texas summer and a variable winter. AC repair and service, heating and furnace repair, heat pump repair and installation, mini-split and ductless systems, full system installation and replacement, thermostat and smart-control upgrades, ductwork repair and sealing, indoor air quality and air filtration, seasonal maintenance and tune-ups: all of it is on the table.
When airflow is uneven or certain rooms won't hold temperature, that points to something specific, whether it's a duct issue, a refrigerant problem, or a failing blower. Condenser and compressor service, refrigerant leak diagnosis, evaporator coil cleaning: we work through the system methodically rather than guessing at parts. No pressure and no gimmicks, just straight HVAC answers.
Leave the heating and cooling to us.
Here's what most people get wrong about their HVAC system: they wait. A system that's running rough in May becomes a system that's out entirely by July, and a furnace that's been slow to start all fall stops starting in January. When the AC goes out in a Texas summer or the heat stops working on a cold night, the situation doesn't improve by waiting until Monday.
When you call, you reach someone who knows the trade and can scope the job on the phone. The call covers what's happening, what the visit involves, and what it costs before anything is booked. We're available every day from 6:00 AM to 9:30 PM for emergency no-heat and no-cool calls, and short-notice work is something we take on regularly.
Call (830) 632-8965 when the system is down.
Central Texas runs long, hot summers and winters that are mild most years but cold enough to matter when a front comes through. Humidity stays a real factor through the warmer months, and the area's growing housing stock means a lot of aging equipment is due for a hard look. The three services below come up often here, and each one fits what this climate actually asks of a system.
A full HVAC system replacement comes up for a few predictable reasons: equipment that's past its useful life, a mismatched pairing where one half of the system was replaced years ago and the other is dragging it down, or an efficiency drop that shows up on the utility bill before it shows up anywhere else. When the conversation turns to replacement, the visit covers a load calculation discussion, proper system sizing for the home or building, and a clear walkthrough of what installation day involves. Cost varies by system type, size, and what the existing setup requires, and you get the rate on the phone before anything is scheduled.
Comal County's mild heating season makes heat pumps a strong fit. A heat pump handles both heating and cooling from a single system, and when winters stay mostly above freezing, it runs efficiently through both seasons without the fuel cost of a furnace. The installation involves equipment selection matched to the home's square footage and layout, proper refrigerant line sizing, and airflow balanced rather than left to chance. Ductless mini-split options work well for additions, older homes without existing ductwork, or spaces that need independent zone control.
What makes this service different is straightforward: a whole-home dehumidifier works with the existing HVAC system to pull moisture out of the air across the entire house, not just one room. In New Braunfels, summer humidity makes indoor air feel heavier than the thermostat reading suggests, and a standalone unit in one room doesn't fix that. A whole-home system ties into the air handler and runs automatically, improving comfort and reducing the load on the AC. It also connects to the broader indoor air quality picture: better humidity control means less mold pressure, better filtration performance, and air that genuinely feels different.
Booking an HVAC service call is simple, and the price conversation happens at the start, not after the visit. When you call, you get the rate on the phone. The price is confirmed before we schedule, and you can ask what the visit covers and get a straight answer.
Pricing set out up front. Code-compliant work. Straight explanations.
What the job costs depends on what the job is. A seasonal tune-up, a refrigerant leak diagnosis, and a full system replacement are different scopes with different pricing. The call is where that gets sorted out, and nothing moves forward until you know what you're agreeing to.
Call (830) 632-8965 for a quote.
When the technician arrives, the real work begins: a thorough check of refrigerant levels, blower motor and air handler inspection, thermostat testing, evaporator coil cleaning, and a full airflow assessment. A capacitor that's reading low, a filter that's been in place too long, a belt showing wear: these are the things a tune-up finds before they become a breakdown call.
Running a tune-up before summer means the AC goes into peak season with clean coils and confirmed refrigerant charge. Running one before the heating season means the furnace or heat pump has been checked before the first cold front. Either way, the system gets a real look rather than a quick visual.
We'll find the fault and set it right.
Property managers, business owners, and commercial clients have different demands than a single-family home. Equipment runs longer hours, tenant comfort is a liability, and a system that goes down during business hours costs more than the repair bill.
We handle commercial AC repair and service, commercial heating repair, rooftop unit repair and replacement, and zone control and HVAC zoning for multi-space buildings. Thermostat and smart-control installation for commercial spaces is part of the work, whether that's a simple programmable upgrade or a building-wide control system. For commercial settings with hydronic heating, boiler service and repair is on the table as well.
The diagnosis explained on every call, and the scope confirmed before the visit starts. That holds for commercial work the same as residential.
New Braunfels is our primary market, and we cover the full city and the surrounding Comal County area. That includes Bulverde, Spring Branch, and Canyon Lake to the north and west, and Schertz along the southern edge of the county.
We also serve customers in Seguin and the Guadalupe County area, San Marcos and Kyle in Hays County to the north, and Buda for properties that fall on the outer edge of the service area. If your address is near New Braunfels and you're not sure whether we cover it, the call will confirm it quickly.
Call (830) 632-8965 and we go through what the system is doing, what equipment is involved, and what the visit will cover.
The rate is confirmed before anything is scheduled, so you know what you are agreeing to before a technician is dispatched. We are available every day from 6:00 AM to 9:30 PM for residential and commercial calls across Comal County.
Yes, we handle residential and commercial HVAC work across New Braunfels and the surrounding area. That includes single-family homes, rental properties, and light commercial buildings such as retail spaces and office buildings. The process is the same for both: scope the job on the phone, confirm the price, then schedule the visit.
We serve New Braunfels and the broader Comal County area, including Canyon Lake, Spring Branch, and Bulverde. We also take calls from San Marcos, Seguin, Kyle, Buda, Schertz, Cibolo, and Wimberley. If you are unsure whether your address falls within the service area, a quick call will confirm it.
When you call about a system that is down, the first conversation covers what the system is doing, what it was doing before it stopped, and what the likely fault range looks like. Pricing is discussed before a visit is confirmed, so nothing moves forward until you know what is involved. We take emergency no-heat and no-cool calls every day from 6:00 AM to 9:30 PM.
Yes, we are available every day of the week from 6:00 AM to 9:30 PM, including Saturday and Sunday. Weekend calls are handled the same way as weekday calls: scoped on the phone, priced before scheduling, and confirmed before anyone is dispatched. There is no separate weekend process.
The visit covers a diagnostic of the reported symptom, a check of the relevant components, and a clear explanation of what was found and what the repair involves. For a tune-up, that means a full inspection of refrigerant levels, blower performance, coil condition, and airflow. For a repair call, it means working through the likely causes before any parts are quoted.
The scope and the rate are confirmed on the call before the visit is scheduled. If the diagnostic turns up something beyond what was discussed on the phone, that gets explained before any additional work is done. Nothing moves forward without your agreement.
That depends on the age of the equipment, the cost of the repair relative to the cost of replacement, and whether the system has the capacity to handle the load it is being asked to carry. We work through that on the call and during the visit rather than defaulting to replacement. The age of the system changes the answer, and that gets said.
Check the thermostat settings and the circuit breaker first, then call us. When the system is completely unresponsive, the diagnostic covers the thermostat, the control board, and the blower circuit before anything else is assumed.
Call (830) 632-8965 and we can scope the likely causes on the phone before scheduling a visit.
A grinding, rattling, or squealing sound from an HVAC unit usually points to a specific mechanical issue, such as a failing blower motor, a loose component in the air handler, or debris in the condenser. Do not run the system if the noise is accompanied by burning smells or if the unit shuts off on its own. Call us and describe what you are hearing so we can scope the likely cause before the visit.
Clear a path to the indoor unit, the furnace or air handler, and the outdoor condenser so the technician can reach the equipment without delay. If there is a return air filter access panel, make sure it is accessible. Keeping pets and children away from the work area during the visit helps the job move efficiently.
Plain questions. Honest diagnosis. Clear options.
When you call New Braunfels HVAC Company, you reach someone who knows the trade and can scope the job on the phone. The price is confirmed before anything is scheduled, and you can ask what the visit covers before you commit to anything. We're open every day from 6:00 AM to 9:30 PM.
Call (830) 632-8965 and we'll get the temperature back where it belongs.
From a quick AC repair to a full system replacement, we handle the heating and cooling work that keeps New Braunfels homes and commercial buildings running through long Texas summers and the cold fronts that follow. The services below cover the full range of what we do, along with what each visit includes, who it fits best, and a practical note on timing or value. Call us with any questions and we will walk through the options before anything is scheduled.
| HVAC Service | What It Covers | When You Need It | What to Keep in Mind |
|---|---|---|---|
| Heat Pump Repair & Service | Reversing valve operation checkRefrigerant charge and leak inspectionDefrost cycle testingThermostat and control board diagnostics | Homes with a heat pump that is not switching between heating and cooling modes or is losing efficiency | A heat pump that struggles in heating mode but cools fine often has a reversing valve issue rather than a refrigerant problem. The diagnostic identifies that distinction before anything else is checked. |
| Whole-Home Dehumidification & Humidity Control | Dehumidifier sizing and selectionAir handler integrationHumidity target settingSystem test across the full home | Comal County homes where indoor air feels heavy or musty even when the AC is running | High indoor humidity in this region can persist through spring and fall even when temperatures are manageable. A whole-home unit operates independently of the cooling cycle and holds humidity to a set target. |
| Full System Installation & ReplacementMost Popular | Load calculation and proper sizingMatched condenser, air handler, and coilRefrigerant line and electrical connectionsSystem testing and airflow verification | Homeowners whose system is aging, requiring repeated repairs, or no longer keeping up with the cooling load | Replacing components from the same equipment generation keeps efficiency ratings accurate and avoids compatibility problems that come from mixing old and new hardware. |
| Heating & Furnace Repair | Ignition system checkLimit and pressure switch testingBlower motor assessmentHeat exchanger inspection | Homes relying on gas furnaces when a cold front moves through Comal County | Furnace calls spike after the first cold snap of the season. Scheduling a check before that window keeps the repair from competing with emergency demand. |
| Thermostat & Smart-Control Installation | Thermostat selection and wiringSmart-control setup and schedulingSystem compatibility checkCalibration and test run | Anyone upgrading from a manual or outdated programmable thermostat to a smart control | A thermostat that is not reading temperature accurately or not communicating correctly with the air handler can cause short cycling and uneven temperatures throughout the home. |
| Seasonal Maintenance & Tune-Ups | Cooling or heating system inspectionCoil cleaning and refrigerant checkBlower and electrical component testingFilter check and airflow assessment | Homeowners who want to catch problems before a season starts rather than during it | Spring is the right window for a cooling tune-up before the long Texas summer. Early fall works for heating. Both windows are before demand for service peaks. |
| Ductwork Repair & Sealing | Static pressure and airflow testingDuct leak identificationSealing and connection repairRegister and grille assessment | Homes with uneven temperatures, high energy bills, or rooms that never reach the set temperature | Duct leaks in attic spaces are common in older Comal County housing stock. Conditioned air lost to an unconditioned attic adds directly to cooling costs through the summer. |
| AC Repair & Service | Refrigerant charge checkEvaporator and condenser coil inspectionCapacitor and contactor testingAirflow diagnosis | Homeowners and property managers dealing with warm air, short cycling, or a unit that runs but does not cool | In a south-central Texas summer, a system running hard on a low refrigerant charge puts extra strain on the compressor. Catching it early matters. |
| Emergency HVAC Service | No-heat and no-cool responseSystem-down diagnosisRepair or temporary stabilizationPrice confirmed before the visit | Any situation where the home is not cooling in July or the heat is out on a cold night and it cannot wait for a routine appointment | We take emergency calls every day from 6:00 AM to 9:30 PM. Having the make and model of the equipment ready speeds up the phone diagnosis before the visit is scheduled. |
| Heat pump Installation | System sizing for the spaceOutdoor unit placement and clearanceRefrigerant line and air handler connectionDual-mode test in heating and cooling | Homeowners replacing a furnace-and-AC setup or adding heating and cooling to a space without existing ductwork | South-central Texas mild winters make heat pumps a practical fit. A single outdoor unit handles both heating and cooling, which removes the need for a separate furnace in many applications. |
| Indoor Air Quality & Air Filtration | Filter system assessmentAir filtration equipment selectionWhole-home dehumidifier integrationAir handler connection and setup | Households dealing with allergy symptoms, musty air, or elevated indoor humidity despite a working AC | A standard AC removes some moisture as a byproduct of cooling but is not designed to hold indoor humidity to a specific target. A dedicated system handles that independently. |
Call us at (830) 632-8965 and we will go through the details, confirm the price, and get the right service scheduled for your home or building.
(830) 632-8965